MASONRY AND STUCCO SUPER 'N' SAND MIXING INSTRUCTIONS
MASONRY SUPER ‘N’ SAND MIXING INSTRUCTIONS
Argos Super ‘N’ Sand can be mixed in a paddle type mortar mixer or by hand. Add approximately 4-5 quarts (3.5-4.7 L) of clean water for each 80 pound bag. Add the mix slowly to the water as the mixer blades turn. Mix for 3-5 minutes. More water may be added to achieve the desired consistency. The amount of water added for each bag is determined by the user.
HOT WEATHER CONSTRUCTION
Within specified time limits, mortar shall be retempered to maintain workability. To maintain consistent mortar color, the mortar/sand ratio, water content, time of tooling, protection and curing conditions must also be consistent. Retemper colored mortar cautiously to avoid color changes.
COLD WEATHER CONSTRUCTION
Protect all masonry material from rain, frost and snow. Heat the sand and mixing water as required by ASTM C270. Do not tool joints before they are thumbprint hard. Protect newly laid masonry from freezing.
COLOR CONSISTENCY
Sand color has a significant effect on the finished color of mortar. Moisture content of joints at the time of tooling and moisture content of masonry units will also greatly affect the finished color of mortar joints.
CLEANING
Muriatic acid is not to be used to clean walls built with cement mortars. Follow recommendation of masonry unit manufacturer to clean masonry.
STUCCO SUPER ‘N’ SAND MIXING INSTRUCTIONS
Argos Stucco Super ‘N’ Sand Stucco Mix can be mixed in a paddle type mortar or by hand. Add approximately 4-5 quarts (3.5-4.7 L) of clean water for each 80 pound bag. Add the mix slowly to the water as the mixer blades turn. Mix for 3-5 minutes. More water may be added to achieve the desired consistency. The amount of water added for each bag is determined by the user.
APPLICATION
Follow the guidance for stucco application in ASTM C926, Standard Specification for Application of Portland Cement-Based Plaster. Additional technical guidelines are provided by The Florida Lath and Plaster Bureau.
SUPER ‘N’ SAND (MORTERO & ESTUCO)
Argos Super n Sand se puede mezclar en una mezcladora de tipo paleta para morteros o a mano. Agregue aproximadamente 4 a 5 cuartos (3.5-4.7 L) de agua limpia por cada bolsa de 80 libras. Agregue Argos Super n Sand lentamente al agua mientras la mezcladora sigue girando. Mezcle de 3 a 5 minutos. Se puede agregar más agua para lograr la consistencia deseada. El usuario determina la cantidad de agua agregada para cada bolsa.